In this article
A bangle personalizer lets your customer pick their bangle size (2.4, 2.6, 2.8 and so on), choose how many bangles in the set, add a name or date to a narrow band and see it on your product photo before paying. Each choice can carry its own fee, and every detail is saved on the order for your karigar or bench jeweler.
Bangles have one problem bracelets do not: they are rigid and have to slide over the hand. A chain bracelet that is half an inch too long still works. A bangle that is one size too small does not go on at all. So the size field matters more here than on almost any other piece of jewelry.
This page walks through Indian bangle sizes, how to sell sets, what fits on a 3 to 6 mm band, how to price it all, and how to build it in PIMW Product Personalizer.
Key takeaways
- Indian bangle sizes count sixteenths of an inch, so 2.6 means a 2.375 inch inner diameter and 2.10 is larger than 2.8.
- Ask for hand measurement or an existing bangle, never wrist size, and tell customers between sizes to go up.
- Sell sets with one size field, a set-size dropdown and a choice of how many bangles get engraved.
- Keep engraving short on narrow bands, plan around the BIS hallmark on gold, and price engraving separately from the metal.
How bangle sizes work
Indian bangle sizes look like decimals but they are not. A 2.4 bangle is 2 and 4/16 inches across the inside, which is 2.25 inches. A 2.6 is 2 and 6/16 inches. The number after the point counts sixteenths of an inch, so 2.10 and 2.12 are bigger than 2.8, not smaller.
That catches out customers outside India and even some within it. Show the inner diameter next to every size.
| Size | Inner diameter (inches) | Inner diameter (mm) | Typical wearer |
|---|---|---|---|
| 2.2 | 2.125 | 54 | Small hands, older girls |
| 2.4 | 2.25 | 57 | Common women's size |
| 2.6 | 2.375 | 60 | Common women's size |
| 2.8 | 2.5 | 63 | Larger hands, many kadas start here |
| 2.10 | 2.625 | 67 | Larger hands, men's kadas |
| 2.12 | 2.75 | 70 | Large hands, loose kadas |
Measurements follow published Indian size charts. Your own maker may vary by a millimetre, so check against your stock.
Kadas are broader and heavier than bangles and are usually worn alone, so they tend to be sized larger and fit looser. If you sell both, give them separate size lists. "Free size" bangles with an opening or clasp should say so plainly and skip the size field.
Help text that stops wrong sizes
Most customers outside India think in wrist size, and wrist size does not help with a bangle. The bangle has to pass over the knuckles.
Put two methods under the size dropdown:
- Use a bangle you own. Lay it on a ruler and measure the inside edge to inside edge in millimetres. Match it to the chart.
- Measure your hand. Bring your thumb and little finger together, wrap a string or tape around the widest part of the hand, and divide the length by 3.14. That gives the inner diameter you need.
Then add one plain line: "Between sizes? Choose the larger one." A slightly loose bangle gets worn. A tight one comes back.
For girls' bangles, sizes around 2.2 to 2.4 cover many children aged 7 to 12, but adjustable styles are the safer choice for kids whose hands are still growing.
Selling bangles as sets
In India bangles are often bought in pairs or sets, for weddings, festivals and gifts. That changes how your personalizer should be built.
- Ask for size once. A set of four bangles goes on the same wrist, so one size dropdown covers the whole set. Do not make the customer pick it four times.
- Let the set size drive the price. A dropdown with "Pair", "Set of 4" and "Set of 6", each with its own price, is clearer than four separate products.
- Decide which bangles get engraved. Most customers want text on one or two bangles in a set, not all of them. Offer "Engrave 1 bangle" and "Engrave 2 bangles" with separate fees.
- Use conditional logic for the second name. For a couple's pair, show a second text field only when "Engrave 2 bangles" is chosen, so each partner's name has its own line.
Mixed metal sets (two gold tone, two silver tone) work well as image swatches. Show a photo of each finished set, not a flat color dot.
Engraving on a narrow band
Bangles are narrow and curved. A band 3 to 6 mm wide has room for one line of short text, and the curve makes long text harder to read because it wraps out of view.
What works:
- Inside engraving for private messages: "Aarav 14.02.2026" or "Ma" or a pair of initials.
- Outside engraving for names in a script that becomes part of the design. Keep it short.
- Character limits by width. As a starting point, try about 12 characters on the outside of a thin band and about 20 on the inside, then test on your own blanks and adjust.
- One font for numbers. Scripts look lovely on a name and turn a date into a squiggle at that height. Offer a clean serif or sans-serif for dates.
For Indian customers, ask whether you can engrave in Devanagari or other scripts before you offer it. Only list fonts your engraver can actually cut cleanly at bangle scale, and make sure the live preview uses the same font so what they see is what they get.
Gold and silver bangles in India
Gold bangles sold in India must carry a BIS hallmark. Hallmarking is mandatory for gold jewelry, and the Indian standard allows six gold grades: 14, 18, 20, 22, 23 and 24 carat.
Two practical points for your personalizer:
- Keep the hallmark clear. The hallmark is struck at a BIS-recognised assaying and hallmarking centre, not by you. Check where it sits on your bangles and position the inside engraving so it does not overlap.
- Price the engraving separately from the metal. Gold jewelry in India is usually priced by weight plus making charges, and the gold rate moves daily. Keep your product price for the metal and add engraving as its own fee, so you can update one without touching the other.
Silver bangles have their own hallmarking standard in India. Lighter, cheaper and easier to engrave, silver is a good place to start if you are testing personalized bangles for the first time.
Pricing bangle personalization
A simple structure that customers understand:
| Option | Example values | Suggested pricing |
|---|---|---|
| Set size | Single, pair, set of 4, set of 6 | Set price per option |
| Bangle size | 2.2 to 2.12 | No charge |
| Engrave how many | None, 1 bangle, 2 bangles | Rs 300 to 600 or $5 to $10 per bangle |
| Inside or outside | Inside, outside, both | Both adds a second fee |
| Gift box | Velvet box, pouch | Rs 150 to 300 or $3 to $6 |
These are suggestions at the time of writing (October 2026). Base yours on actual engraving time per piece. PIMW shows every fee as a separate cart line, so the customer sees "Engraving, 2 bangles" next to the set price.
How to set up a bangle personalizer in PIMW
Your first personalized bangle can be live in about 15 minutes, and the free plan covers your first product.
- Install PIMW Product Personalizer and add the app block to your product template in the theme editor.
- Create an option set called "Bangle set".
- Add a set size dropdown with a price on each choice.
- Add the bangle size dropdown with inner diameters in each label, for example "2.6 (60 mm)", and the measuring help text.
- Add an "Engrave how many" dropdown with its fees.
- Add the first name field with its character limit and fonts, and position it on the bangle in your product photo so the live preview sits on the band.
- Add the second name field and set it to show only when "2 bangles" is chosen. Conditional logic starts on the Pro plan.
- Place a test order and check that size, set, text and font all appear as line-item properties on the order.
Common mistakes with bangle personalizers
- Treating 2.10 as smaller than 2.8. Sort your size list by actual diameter, not by how the number looks.
- Asking for wrist size. Bangles go over the hand. Ask for hand measurement or an existing bangle.
- Size picked per bangle in a set. One wrist, one size. Ask once.
- Long text on a curved band. Half of it wraps out of view. Keep limits tight and let the preview prove it.
- Engraving over the hallmark. Plan the inside layout around it.
- Mixing metal price and engraving fee. When the gold rate moves you should not have to rebuild your options.
If your customers also buy flexible styles, see our bracelet personalizer for wrist-sized chains and cuffs.
Frequently asked questions
What do bangle sizes 2.4, 2.6 and 2.8 mean?
They are Indian bangle sizes, and the number after the point counts sixteenths of an inch of inner diameter. A 2.4 is 2.25 inches (about 57 mm), a 2.6 is 2.375 inches (about 60 mm) and a 2.8 is 2.5 inches (about 63 mm). Sizes 2.10 and 2.12 are larger still.
How should customers measure for a bangle?
Either measure the inner diameter of a bangle they already own, or bring the thumb and little finger together, measure around the widest part of the hand and divide by 3.14. If they fall between sizes, the larger size is safer.
How much text fits on a bangle?
Not much. A 3 to 6 mm band holds one short line, so start around 12 characters outside and 20 inside and test on your own blanks. The live preview shows the customer when a message is too long for the curve.
How do I sell personalized bangle sets on Shopify?
Use one size dropdown for the whole set, a set-size dropdown such as pair, set of 4 or set of 6 with its own price, and a choice of how many bangles get engraved. Conditional logic in PIMW, available from the Pro plan, can show a second name field only when two bangles are engraved.
Do gold bangles need a hallmark in India?
Yes. BIS hallmarking is mandatory for gold jewelry in India, and the standard permits 14, 18, 20, 22, 23 and 24 carat grades. Plan your inside engraving so it does not overlap the hallmark.
Can I charge for bangle engraving separately from the gold price?
Yes, and you should. Keep the metal in your product price and add engraving as its own fee. PIMW shows the fee as a separate cart line, so you can update gold pricing without rebuilding your personalization options.
Keep exploring
Sources & further reading
Primary sources referenced in this article. We link to official platform documentation and standards bodies rather than secondary summaries so you can verify claims directly.